Flashing RK3568

From Ariaboard Wiki
Revision as of 20:47, 25 September 2024 by C2h2 (talk | contribs) (Created page with "==Update emmc image== We can use a USB cable to flash emmc. # Download the windows flash software given by support. *安装<code>DriverAssitant_v5.1.1</code>文件夹内的驱动 *打开烧录软件，选择升级固件这个Tab，然后点击固件选择相应的固件文件 500px *通过按键方式进入烧录模式 *使用两边都是标准USB公头的连接线连接RK3568 USB口和烧录用电脑的USB口（注意电脑USB口的供电...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Update emmc image

We can use a USB cable to flash emmc.

  1. Download the windows flash software given by support.
  • 安装DriverAssitant_v5.1.1文件夹内的驱动
  • 打开烧录软件，选择升级固件这个Tab，然后点击固件选择相应的固件文件

File:Burn-usb-01-wiki.png

  • 通过按键方式进入烧录模式
  • 使用两边都是标准USB公头的连接线连接RK3568 USB口和烧录用电脑的USB口（注意电脑USB口的供电能力，如供电能力不足会造成烧录失败，先连接好USB线再按键进入烧录模式

File:Burn-usb-port-wiki.png File:Burn-usb-line-wiki.png

  • 等待烧录软件显示发现一个Maskrom设备，然后点击升级

File:Burn-usb-02-wiki.png

  • 右侧信息栏会显示烧录进度和状态，烧录成功后RK3568会自动重启，请完成一次安全的电源开关，保证MCU状态复位，或进行喂狗。

File:Windows-burn-00-wiki.png


Photonicat刷机

参考：https://photonicat.com/wiki/Photonicat_%E5%88%B7%E6%9C%BA%E6%93%8D%E4%BD%9C%E6%89%8B%E5%86%8C

Retrieved from "https://ariaboard.com/index.php?title=Flashing_RK3568&oldid=273"