Aria Rockchip RK3308 Linux SDK: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 9: | Line 9: | ||
git submodule update --init | git submodule update --init | ||
==SDK Buildroot Configuration== | |||
cd buildroot | cd buildroot | ||
./load-novotech-release-config.sh | ./load-novotech-release-config.sh | ||
| Line 15: | Line 15: | ||
./save-novotech-release-config.sh | ./save-novotech-release-config.sh | ||
==SDK Build== | |||
./build.sh | ./build.sh | ||
==Upload Firmware to Device== | |||
Connect the OTG port of Dev board to the USB port of PC, then: | Connect the OTG port of Dev board to the USB port of PC, then: | ||
tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool uf rockdev/update.img | tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool uf rockdev/update.img | ||
If flash is empty or the bootloader on flash is different, you may need to clean the flash and uploader our bootloader: | |||
tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool ef rockdev/MiniLoaderAll.bin | |||
Revision as of 21:16, 16 November 2020
Pre-Requisite
For Debian/Ubuntu:
sudo apt-get install build-essential libc6:i386 genext2fs libncurses-dev
Aria Rockchip RK3308 Linux SDK
git clone https://github.com/ariaboard-com/rockchip_rk3308_linux_sdk.git -b rk3308-evb-novotech-release --single-branch cd rockchip_rk3308_linux_sdk git submodule update --init
SDK Buildroot Configuration
cd buildroot ./load-novotech-release-config.sh make O=output/novotech_rk3308_release menuconfig #Configure buildroot here. ./save-novotech-release-config.sh
SDK Build
./build.sh
Upload Firmware to Device
Connect the OTG port of Dev board to the USB port of PC, then:
tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool uf rockdev/update.img
If flash is empty or the bootloader on flash is different, you may need to clean the flash and uploader our bootloader:
tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool ef rockdev/MiniLoaderAll.bin