Aria NXP imx6 kernel & uboot: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Pre-Requisite== Easy Install gcc Cross Compiler ==official uboot & kernel == # https://community.freescale.com/docs/DOC-95015 # https://community.freescale.com/docs/DOC...") |
m (C2h2 moved page Aria mx6 kernel & uboot to Aria NXP imx6 kernel & uboot) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 23: | Line 23: | ||
make imx6q-sabresd.dtb | make imx6q-sabresd.dtb | ||
==Aria mx6 uboot== | ==Aria mx6 uboot== | ||
| Line 30: | Line 30: | ||
./build.sh | ./build.sh | ||
#to install | |||
sudo dd if=u-boot.imx of=${DISK} bs=512 seek=2 | |||
==Aria mx6 kernel== | ==Aria mx6 kernel== | ||
| Line 35: | Line 37: | ||
git checkout imx_3.10.17_1.0.1_ga | git checkout imx_3.10.17_1.0.1_ga | ||
./build-imx6q.sh #or ./build-imx6dl.sh | ./build-imx6q.sh #or ./build-imx6dl.sh | ||
#kernel install: | |||
dd if=uImage of=/dev/sde bs=512 seek=2048 | |||
#also extract kernel modules into your rootfs | |||
==make a sd card (including latest uboot, kernel)== | ==make a sd card (including latest uboot, kernel)== | ||
http://www.eewiki.net/display/linuxonarm/i.MX6q+SABRE+Board+for+Smart+Devices | http://www.eewiki.net/display/linuxonarm/i.MX6q+SABRE+Board+for+Smart+Devices | ||
==uboot args== | |||
setenv bootargs_mmc setenv bootargs ${bootargs} root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:off video=mxcfb2:off fbmem=28M ip=dhcp | |||
setenv bootargs_mmc setenv bootargs ${bootargs} root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1024x768M@60; saveenv; boot | |||
setenv bootargs ${bootargs} root=/dev/mmcblk1p1 rootwait run bootargs_base bootargs_mmc; mmc dev 2; mmc read ${loadaddr} 0x800 0x2000; setenv video mxcfb0:dev=hdmi,1920x1080M@60; saveenv; bootm | |||
Latest revision as of 04:40, 3 November 2020
Pre-Requisite
Easy Install gcc Cross Compiler
official uboot & kernel
- https://community.freescale.com/docs/DOC-95015
- https://community.freescale.com/docs/DOC-95017/version/16
official uboot build
cd u-boot export CROSS_COMPILE=arm-linux-gnueabihf- make mx6qsabresd_config make
ofiicial kernel build
git clone git://git.freescale.com/imx/linux-2.6-imx.git cd linux-2.6-imx git checkout imx_3.10.17_1.0.0_ga make imx_v7_defconfig make -j16 uImage LOADADDR=0x10008000 make -j16 modules make imx6q-sabresd.dtb
Aria mx6 uboot
git clone https://github.com/c2h2/aria-imx6-uboot.git git checkout imx_3.10.17_1.0.0_ga_sdcard ./build.sh
#to install
sudo dd if=u-boot.imx of=${DISK} bs=512 seek=2
Aria mx6 kernel
git clone https://github.com/c2h2/aria-imx6-kernel.git git checkout imx_3.10.17_1.0.1_ga ./build-imx6q.sh #or ./build-imx6dl.sh
#kernel install: dd if=uImage of=/dev/sde bs=512 seek=2048 #also extract kernel modules into your rootfs
make a sd card (including latest uboot, kernel)
http://www.eewiki.net/display/linuxonarm/i.MX6q+SABRE+Board+for+Smart+Devices
uboot args
setenv bootargs_mmc setenv bootargs ${bootargs} root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:off video=mxcfb2:off fbmem=28M ip=dhcp
setenv bootargs_mmc setenv bootargs ${bootargs} root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1024x768M@60; saveenv; boot
setenv bootargs ${bootargs} root=/dev/mmcblk1p1 rootwait run bootargs_base bootargs_mmc; mmc dev 2; mmc read ${loadaddr} 0x800 0x2000; setenv video mxcfb0:dev=hdmi,1920x1080M@60; saveenv; bootm