Compiling RK3568 SDK Guide - Revision history

C2h2 at 03:11, 26 September 2024

2024-09-26T03:11:40Z

← Older revision		Revision as of 22:11, 25 September 2024
Line 114:		Line 114:
	sudo ./rkdeveloptool rd		sudo ./rkdeveloptool rd
	</pre>		</pre>


	~~==How to modify your own version of kernel for openwrt==~~
	~~Compile <code>rockchip_rk3568_openwrt</code> with above steps.~~

	~~Modify:~~
	*DTB: https://github.com/photonicat/rockchip_rk3568_openwrt/blob/master/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
	*kernel patches: (we need to add/ modify your version of kernel patches into this dir and recompile): https://github.com/photonicat/rockchip_rk3568_openwrt/tree/master/target/linux/rockchip/patches-6.1

	~~Recompile and done.~~

C2h2: /* Get Repo files by tarball(with .git) */

2024-09-26T03:10:37Z

Get Repo files by tarball(with .git)

← Older revision		Revision as of 22:10, 25 September 2024
Line 10:		Line 10:
	</pre>		</pre>

	===Get Repo files by tarball~~(with .git)~~===		===Get SDK Repo files by tarball===
	Download your SDK: (replace url with your given url)		Download your SDK: (replace url with your given url)
	wget https://dl.photonicat.com/repos/rk3568-debian-source-20220927.tar.xz		wget https://dl.photonicat.com/repos/rk3568-debian-source-20220927.tar.xz

C2h2 at 02:48, 26 September 2024

2024-09-26T02:48:25Z

← Older revision		Revision as of 21:48, 25 September 2024
Line 124:		Line 124:

	Recompile and done.		Recompile and done.

	~~==Photonicat Button Settings ==~~
	~~{\| class="wikitable sortable"~~
	\|-
	~~! 功能 !! 进入方式 !! 状态提示~~
	\|-
	~~\|开机\|\|关机状态下长按3秒\|\|电源灯常亮~~
	\|-
	~~\|开机进入烧录模式\|\|关机状态下短按3下，再长按10秒以上\|\|电源灯闪烁（0.25秒亮，0.25秒暗）~~
	\|-
	~~\|开机恢复出厂设置\|\|关机状态下短按1下，再长按17秒以上\|\|电源灯闪烁（0.5秒亮，0.5秒暗）~~
	\|-
	~~\|关机\|\|开机状态下长按3秒\|\|电源灯熄灭~~
	\|-
	~~\|查看电量\|\|短按1下\|\|3个LED灯全闪2下，根据电量显示，3灯再次全闪2下退出（电量显示定义参见电量定义表）~~
	\|-
	\|}

	~~==Generic Devices: Button Settings ==~~
	~~{\| class="wikitable sortable"~~
	\|-
	~~! 功能 !! 进入方式 !! 状态提示~~
	\|-
	~~\|开机进入烧录模式\|\|关机状态下短按3下，再长按10秒以上\|\|电源灯闪烁（0.25秒亮，0.25秒暗）~~
	\|-
	~~\|开机恢复MCU\|\|关机状态下短按1下，再长按8秒以上\|\|电源灯闪烁（0.5秒亮，0.5秒暗）~~
	\|}

C2h2: /* How to modify your own version of kernel for openwrt */

2024-09-26T02:38:19Z

How to modify your own version of kernel for openwrt

← Older revision		Revision as of 21:38, 25 September 2024
Line 125:		Line 125:
	Recompile and done.		Recompile and done.

	===Photonicat Button Settings ===		==Photonicat Button Settings ==
	{\| class="wikitable sortable"		{\| class="wikitable sortable"
	\|-		\|-
Line 142:		Line 142:
	\|}		\|}

	===Generic Button Settings ===		==Generic Devices: Button Settings ==
	{\| class="wikitable sortable"		{\| class="wikitable sortable"
	\|-		\|-

C2h2 at 02:34, 26 September 2024

2024-09-26T02:34:53Z

← Older revision		Revision as of 21:34, 25 September 2024
Line 124:		Line 124:

	Recompile and done.		Recompile and done.

			===Photonicat Button Settings ===
			{\| class="wikitable sortable"
			\|-
			! 功能 !! 进入方式 !! 状态提示
			\|-
			\|开机\|\|关机状态下长按3秒\|\|电源灯常亮
			\|-
			\|开机进入烧录模式\|\|关机状态下短按3下，再长按10秒以上\|\|电源灯闪烁（0.25秒亮，0.25秒暗）
			\|-
			\|开机恢复出厂设置\|\|关机状态下短按1下，再长按17秒以上\|\|电源灯闪烁（0.5秒亮，0.5秒暗）
			\|-
			\|关机\|\|开机状态下长按3秒\|\|电源灯熄灭
			\|-
			\|查看电量\|\|短按1下\|\|3个LED灯全闪2下，根据电量显示，3灯再次全闪2下退出（电量显示定义参见电量定义表）
			\|-
			\|}

			===Generic Button Settings ===
			{\| class="wikitable sortable"
			\|-
			! 功能 !! 进入方式 !! 状态提示
			\|-
			\|开机进入烧录模式\|\|关机状态下短按3下，再长按10秒以上\|\|电源灯闪烁（0.25秒亮，0.25秒暗）
			\|-
			\|开机恢复MCU\|\|关机状态下短按1下，再长按8秒以上\|\|电源灯闪烁（0.5秒亮，0.5秒暗）
			\|}

C2h2 at 02:27, 26 September 2024

2024-09-26T02:27:09Z

@@ Line 91: / Line 91: @@
 Use <pre>make menuconfig</pre> to select <pre><M> package_name</pre> for your desired package(s).
 If you want to include your own packages to system image, see OpenWRT official documents https://openwrt.org/docs/guide-developer/packages for help.
 ==Flash system images to the onboard eMMC==
@@ Line 132: / Line 107: @@
 </pre>
-Refer: [[Photonicat_快速上手#4G/5G版本按键功能定义]] to enter the firmware update mode, use A-to-A cable to connect USB OTG port to PC, and use the command below:
+Enter the firmware update mode, use A-to-A cable to connect USB OTG port to PC, and use the command below:
 <pre>
 gunzip photonicatwrt-23.04-rxxxx+xx-xxxxxxxxx-rockchip-armv8-ariaboard_photonicat-squashfs-sysupgrade.img.gz #Replace file name with the one you get indeed.

C2h2: Created page with "==Create Debian System Image (Rockchip Official)== ===Host System Requirements=== Debian 11 (bullseye) or Ubuntu 20.04. with Memory >= 16GB and disk space >= 100GB. ===Compiling Requirements=== Install the necessary packages on Debian/Ubuntu systems:

 sudo apt-get install build-essential flex bison genext2fs

===Get Repo files by tarball(with .git)=== Download your SDK: (replace url with your given url) wget https://dl.photonicat.com/repos/rk3568-debian-so..."

2024-09-26T02:24:16Z

Created page with "==Create Debian System Image (Rockchip Official)== ===Host System Requirements=== Debian 11 (bullseye) or Ubuntu 20.04. with Memory >= 16GB and disk space >= 100GB. ===Compiling Requirements=== Install the necessary packages on Debian/Ubuntu systems: <pre> sudo apt-get install build-essential flex bison genext2fs </pre> ===Get Repo files by tarball(with .git)=== Download your SDK: (replace url with your given url) wget https://dl.photonicat.com/repos/rk3568-debian-so..."

New page

==Create Debian System Image (Rockchip Official)==

===Host System Requirements===
Debian 11 (bullseye) or Ubuntu 20.04. with Memory >= 16GB and disk space >= 100GB.

===Compiling Requirements===
Install the necessary packages on Debian/Ubuntu systems:
<pre>
sudo apt-get install build-essential flex bison genext2fs
</pre>

===Get Repo files by tarball(with .git)===
Download your SDK: (replace url with your given url)
wget https://dl.photonicat.com/repos/rk3568-debian-source-20220927.tar.xz

===Build system image===
Run the command below:
<pre>
./build.sh
</pre>
The output path is rockdev, system image path is rockdev/pack

==Build Debian/Ubuntu system image (mainline u-boot & kernel)==
Check README in https://github.com/photonicat/rockchip_rk3568_linux_mainline for building system image.

==Build OpenWRT==
Photonicat image contains following packages：
# OpenWRT (within rk3568-linux-sdk which builds bootloader, uboot, kernel and OpenWRT)
# pcat-manager (within rk3568-linux-sdk)
# pcat-manager-web (python closed source. install manually: e.g: https://dl.photonicat.com/repos/openwrt/volatile/pcat-manager-web_1.0.9-0_aarch64_cortex-a53.ipk, we need to change luci listen port to 8080.)
# quectel-cm (within rk3568-linux-sdk)

rk3568-linux-sdk will fetch [https://github.com/photonicat/rockchip_rk3568_uboot uboot], [https://github.com/photonicat/rockchip_rk3568_kernel kernel], [https://github.com/photonicat/rockchip_rk3568_openwrt openwrt], and copmile them in one build script.

In addition to default packages we have 3 more package for power and modem manager.
* [https://github.com/photonicat/rockchip_rk3568_pcat_manager modem/power_manager] (written in c)
* web interface for displaying mobile modem and battery info. (written in python)
* c program modem watchdog

===Host System Requirements===
Debian 11 (bullseye) or Ubuntu 20.04, other distributions may work but not tested.

===Compiling Requirements===
Please a NORMAL USER, not root

On Debian/Ubuntu systems, install the packages:
<pre>
sudo apt update
sudo apt upgrade -y
sudo apt install -y ack antlr3 asciidoc autoconf automake autopoint binutils bison build-essential \
bzip2 ccache cmake cpio curl device-tree-compiler fastjar flex gawk gettext gcc-multilib g++-multilib \
git gperf haveged help2man intltool libc6-dev-i386 libelf-dev libglib2.0-dev libgmp3-dev libltdl-dev \
libmpc-dev libmpfr-dev libncurses5-dev libncursesw5-dev libreadline-dev libssl-dev libtool lrzsz \
mkisofs msmtp nano ninja-build p7zip p7zip-full patch pkgconf python2.7 python3 python3-pyelftools \
libpython3-dev qemu-utils rsync scons squashfs-tools subversion swig texinfo uglifyjs upx-ucl unzip \
vim wget xmlto xxd zlib1g-dev
</pre>

===Get repo files===
Get repo files from Github (non-root user):
<pre>
git clone https://github.com/photonicat/rockchip_rk3568_openwrt.git
cd rockchip_rk3568_openwrt
</pre>

===Config build target===
Run the command below:
<pre>
./scripts/feeds update -a
./scripts/feeds install -a
cp ./configs/base_defconfig .config
</pre>

===Build system image===
Run the command below:
<pre>
make
</pre>
The output path is <code>bin/targets/rockchip/armv8/</code>, system image will be named like <code>photonicatwrt-23.04-rxxxx+xx-xxxxxxxxx-rockchip-armv8-ariaboard_photonicat-squashfs-sysupgrade.img.gz</code>

===Edit your menuconfig (Optional)===
<pre>
make menuconfig
</pre>

save and re-run build process again.

IPKs will be under: <pre>bin/targets/rockchip/armv8/packages/</pre>

===Build your own package, modules on OpenWRT (Optional)===
Use <pre>make menuconfig</pre> to select <pre><M> package_name</pre> for your desired package(s).
If you want to include your own packages to system image, see OpenWRT official documents https://openwrt.org/docs/guide-developer/packages for help.

===Install pcat-manager-web on OpenWRT (Optional)===
If you want to use original Web management tool, you should change the port used by luci to 8080, edit /etc/config/uhttpd on device, change
<pre>
list listen_http '0.0.0.0:80'
list listen_http '[::]:80'
list listen_https '0.0.0.0:443'
list listen_https '[::]:443'
</pre>
to
<pre>
list listen_http '0.0.0.0:8080'
list listen_http '[::]:8080'
list listen_https '0.0.0.0:8443'
list listen_https '[::]:8443'
</pre>

Then install pcat-manager-web on device:
<pre>
cd /tmp
wget https://dl.photonicat.com/repos/openwrt/r2304/volatile/pcat-manager-web_1.0.22-19_aarch64_generic.ipk
opkg install pcat-manager-web_1.0.22-19_aarch64_generic.ipk
</pre>

Reboot your device to apply changes.

==Flash system images to the onboard eMMC==
Prepare update tools and files:
<pre>
git clone https://github.com/rockchip-linux/rkdeveloptool.git
cd rkdeveloptool
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
aclocal
autoreconf -i
autoheader
automake --add-missing
./configure
make
wget https://dl.photonicat.com/images/MiniLoaderAll.bin
</pre>

Refer: [[Photonicat_快速上手#4G/5G版本按键功能定义]] to enter the firmware update mode, use A-to-A cable to connect USB OTG port to PC, and use the command below:
<pre>
gunzip photonicatwrt-23.04-rxxxx+xx-xxxxxxxxx-rockchip-armv8-ariaboard_photonicat-squashfs-sysupgrade.img.gz #Replace file name with the one you get indeed.
sudo ./rkdeveloptool db MiniLoaderAll.bin
sudo ./rkdeveloptool wl 0 photonicatwrt-23.04-rxxxx+xx-xxxxxxxxx-rockchip-armv8-ariaboard_photonicat-squashfs-sysupgrade.img
sudo ./rkdeveloptool rd
</pre>

==How to modify your own version of kernel for openwrt==
Compile <code>rockchip_rk3568_openwrt</code> with above steps.

Modify:
*DTB: https://github.com/photonicat/rockchip_rk3568_openwrt/blob/master/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
*kernel patches: (we need to add/ modify your version of kernel patches into this dir and recompile): https://github.com/photonicat/rockchip_rk3568_openwrt/tree/master/target/linux/rockchip/patches-6.1

Recompile and done.